WiiToo! includes all the software needed to make your wifi connection work on the firstīoot without the need to install any more software, it includes the firmware necessary to make the internal wifi card work out of the box, but you have to configure wpa_supplicant to fit your network needs. You can view all available timezones exploring /mnt/wiiroot/usr/share/zoneinfo. To setup the clock copy to /mnt/wiiroot/etc/timezone the required file according to your timezone, for example: cp /mnt/wiiroot/usr/share/zoneinfo/America/New_York /etc/localtime Openrc is the init system used in Gentoo, we have to setup clock and other settings. Final stepsFinally we configure some openrc settings, and the network.

To uncompress you need xz-utils: $ xz -d /path/to/ # tar xpf /path/to/wiitoo.tar -C /mnt/wiiroot/ħ. Now use fdisk to create a primary fat16 partition (this will be our boot partition), 30M should be enough for WiiToo! kernel images + bootmi, but if you are going to use another homebrew apps, or to store data from your Wii, make it bigger.įinally create the partition for the root filesystem (the bigger the better :D), exit fdisk, and unplug the SD card.Īn alternative is using sudo, you must put sudo at the start of the commands that start with #, the commands that start with $ can be run as a normal user.Ĭreating the filesystems # /sbin/mkfs.vfat -n boot /dev/mmcblk0p1 # /sbin/mkfs.ext3 -L whiite /dev/mmcblk0p2Ĭreating mountpoints and mounting the filesystems # mkdir /mnt/wiiroot /mnt/wiiboot # mount /dev/mmcblk0p1 /mnt/wiiboot # mount /dev/mmcblk0p2 /mnt/wiiroot Now put your SD card on the reader, find the corresponding device file on /dev, mine is /dev/mmcblk0, (Tip: See dmesg output if you are on linux) and umount any partition that can be mounted (Check with df). The recommended partitioning scheme it's the whiite-linux scheme, else you will have to edit /etc/fstab and the boot parameters on theīackup all the data on the SD card, before starting, or you will lose it.

Simple tv 0 4 7 r4 download